Airfix 1/72 Bae Hawk Mk.1/51

KIT #: A03085
PRICE: $11.75 MSRP
DECALS: Two options
REVIEWER: Scott Van Aken
NOTES: New mold kit

HISTORY

The Hawk entered RAF service in April 1976, replacing the Folland Gnat and Hawker Hunter in the advanced training and weapons training roles respectively. The Hawk T1 ("Trainer Mark 1") was the original version used by the RAF, deliveries commencing in November 1976, with 176 being ordered.

From 1983 to 1986, some Hawks were equipped as the short-range interceptor aircraft for point defence. 88 T1s were modified to carry two AIM-9L Sidewinder air-to-air missiles (AAMs) in addition to the centreline gun pod carrying a single 30 mm ADEN cannon. These aircraft were designated Hawk T1A. In the event of war, they would have worked in collaboration with Tornado F3 aircraft, which would use their Foxhunter search radars to vector the radarless Hawks against enemy targets. Such missions would have been flown by instructor pilots. Conversions were completed in 1986. With the fall of the Soviet Union and the end of the Cold War, RAF Hawks are no longer tasked with this role. Hawks were used also as "aggressors", simulating air combat with Tornado ADVs.

The most famous RAF operator of the Hawk is the Red Arrows aerobatic team, which adopted the plane in 1979.

The Hawk subsequently replaced the English Electric Canberra in the target towing role.

The Royal Navy acquired a dozen Hawk T1/1As from the RAF, for use as aerial targets for the training of ships' gunners and radar operators.

Eighty Hawk T1/1A aircraft have been upgraded under the Fuselage Replacement Programme (FRP), which involves the replacement of the aft, centre and rear fuselage sections, using new build sections derived from the Mk. 60.

In 2009, the RAF began receiving the first Hawk T2 aircraft, which will replace the T1 in the advanced trainer role.

THE KIT

This very much looks like a new mold kit and of one of my favorite aircraft. There is just something about the Hawk that looks right; at least the initial production versions before they started tacking on all that stuff to the nose and tail. Typical of the latest batch of Airfix new molds, the engraved detail, which is really quite good, seems to be a bit much, especially when compared to the Japanese and even newer Czech releases. However, few have really found that to be a deal breaker.

Prior to this kit, there have been older, raised panel line kits of this plane by Airfix and Matchbox when the plane first came out. Later, Fujimi and Italeri produced kits, though the Fujimi one had the wing fences in the wrong location, and the Italeri kit was fiddly. Now we have a new 21st century mold. This one has a nice, though somewhat basic cockpit with decals for the instruments and a pair of crew members to help hide the bare seats.

There are nicely done landing gear with complete wells. The nose gear is attached when the fuselage halves are cemented together, increasing the opportunity to break it during construction, though to be frank, it is a rather sturdy piece. The two piece canopy includes the blast shield, something missed in some other kits. Like other kits, it has it attached to the canopy. All of the gear doors and the speed brake can be posed up or down as one wishes, though there is no in flight display stand. For stuff to put under the plane there is a gun pod, and either tanks or Sidewinders, the latter of which are nicely molded. Thankfully, Airfix have not pre-opened these attachment holes so one can build a clean airframe. I see a smoke tank on the sprues so (no surprise) a Red Arrows boxing is in the offing. There are also bits on there that are apparently for the T.2 version and so not appropriate for this variant.

Markings are for a black 100 Squadron plane or a two tone green Finnish AF aircraft of the Midnight Suns display team from 2000. There are several options in terms of matching fin numbers with serials for the latter. Instructions have 22 well drawn construction steps with detail images for alignment and optional bits. As usual, only Humbrol numbers are given for paints. The decal sheet is well done and has a plethora of stencils, so those will keep one busy for a few days.

CONCLUSIONS

I'm glad to see this kit, despite there being several already on the market, but I'm biased because I like the plane. The most reasonable price should help make this a good seller and those who have been around probably have a bunch of Modeldecal sheets for all sorts of options in case one doesn't want to use the kit markings.

REFERENCES

http://en.wikipedia.org/wiki/BAE_Hawk

January 2011 

Thanks to me and an impulse buy for this one.

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note toContributors.

Back to the Main Page

Back to the Previews Index Page