SET:

Ultracast 1/48 Spitfire Lower Cowls

FOR:

1/48 ICM kit

PRICE:

See Review

REVIEW BY:

Scott Van Aken

NOTES:

S&H on these items is US$4.00 /CDN$5.50

 

Continuing to provide resin replacement bits for current kits, Ultracast has returned to the ICM kit for this next series of resin parts. As with all Ultracast products, the quality is absolutely first rate with no flaws what so ever. Also, Ultracast has been able to provide the parts with minimal hassles in removing the parts from the resin block. No need to spend a great deal of time sanding off a huge block as most parts are attached by a thin wafer that can often be cut with a hobby knife.

Ultracast has provided two different undercowl pieces for the ICM kit. These have the carb intakes molded as part of the cowl so that is another seam that you don't have to mess with. The early style is #48093 and is shown on the left. To the right is #48094, the later version. Cost of either one is $4.95 US/$5.95 CDN plus shipping. They are direct replacements for the kit bits so installation is a breeze.

Review copy courtesy of the fine folks at Ultracast. Visit them at their website.

If you would like your productreviewed fairly and quickly by a site that averages thousands of  visits a day, please contact me or see other details in the Note to Contributors.