|FOR:||ProModeler/Revell 1/48 kit|
|REVIEWER:||Scott Van Aken|
Now for one for the ProModeler or Revell 1/48 Me-410. In this set, Scale Aircraft Conversions provides is The two main gear legs, some smaller attachment pieces and a new tail wheel. It has been a long time since I built my 410 so I don't recall all the gear bits. The little thing on the far right could just be 'stuff' or could be some sort of fine part so I left it in the picture.
The gear is quite well cast and all one needs to do is clean up the mold seams, paint things and install them in place as they are direct replacements for the kit parts. It is not uncommon for cast metal bits to be a bit bent but some careful straightening out will bring them into line once again.
You can order these direct athttp://www.scaleaircraftconversions.com if your local hobby shop does not stock them.
Thanks to Scale Aircraft Conversions for the review set.
If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.
Back to the Main Page
Back to the Detail Sets Page