Pavla U 72-79, S-3A Viking Control surfaces




Scott Van Aken


Resin. For the Hasegawa 1/72 S-3A/B kit

Continuing with the goodies for the S-3 Viking, this set is a complete set of control surfaces for the Hasegawa kit. It includes full flaps, a set of ailerons, elevators and a rudder. All of the flight surfaces are molded at pretty near full deflection with the trim tabs angled opposite the direction of deflection as was the norm. The horizontal stabs are molded with the elevators and include the mounting tab. A nice touch. The molding on this set is superb and it should be a simple matter to cut away the kit surfaces and replace them. One will have to pay special attention to the flaps as they did angle back and down so the area under the wing will need to be properly filled and shaped.

May 2007

Review copy courtesy of the fine folks atPavla ModelsPavlamodels - logo. Visit them at theirwebsite.

If you would like your productreviewed fairly and quickly by a site that averages over 350,000 visitors a month, please contact me or see other details in the Note to Contributors.