Pavla U 48-44: Mirage 2000C Control Surfaces




Scott Van Aken


For the Kinetic 1/48 kit

While Pavla mostly concentrates on 1/72 scale, they do have a nice lineup of 1/48 bits. Adding to it is this set of control surfaces for the Kinetic Mirage 200C. In addition to the new control surfaces, you have a set of actuator fairings as well as the inner flap sections that will mate up with the fuselage side. The bits in the bottom right of the image are probably the ESM antennas. I have to assume that these are an intuitive set as there are no instructions. As you can see, the resin a nicely done with no voids and should be easy to remove from the pour stub.

September 2013

Review copy courtesy of the fine folks atPavla ModelsPavlamodels - logo. Visit them at theirwebsite.

If you would like your productreviewed fairly and quickly, please contact me or see other details in the Note to Contributors.