Aires 4556: Mirage 2000B/D/N exhaust nozzle (closed)






Kinetic kit


Scott Van Aken

While the kit parts for the Kinetic 1/48 Mirage 2000 are probably nice enough for most modelers. This resin and p.e. set will appeal to many who want the additional detail. This set consists of three resin parts and a p.e. fret. This is 'old school' resin molding in that there are fairly large pour blocks that will have to be sawn away prior to use of the resin bits. All the p.e. bits are for the inside of the exhaust above the final compressor stage. There are instructions to help you out and this set will be pretty much a direct replacement for the kit bits. Though it is for the two seat Mirage 2000, I'd bet that this will fit the single seater as well.

October 2023

Copyright All rights reserved. No reproduction in part or in whole without express permission from the editor. 

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.