Often times resin replacement parts can offer not only the correct configuration of a part of an aircraft, but also greater detail. This particular piece is a replacement for the part that come with the recent Revell 1/32 Bf-109G-6 kits and corrects the spacing that is off on the kit bits. This is the standard upper cowling that came with many of the aircraft.

To use this, you remove the part from the pour stub, and remove the keel piece that is on the underside. On the kit, you remove the brace on both fuselage halves that cover the upper cowling section. Then it is a simple matter of installing this in the place of the kit bits.

BarracudaCast provides full instructions on this procedure to ensure that you get it right. If you are a fan of Revell's 1/32 109G, then this is something you should consider.

May 2021

Copyright ModeingMadness.com. All rights reserved.

My thanks to www.barracudacast.com for the review set. You can get this item at this link.

If you would like your product reviewed fairly and quickly, please contact me or see other details in the Note to Contributors.