Doyusha 1/100 DC-3 (SMB Stage Lines)

The DC-3 was literally the airliner than got American air line companies into a profitable business. It was fast, comfortable, and able to carry a decent number of passengers. It was also a very capable transport that, thanks in part to WWII, was built in considerable numbers.

The aircraft also made it quite difficult for new types to get into revenue service after WWII. This is because the government was selling them off cheaply as they were no longer needed. A booming business was created to convert the military transports into civil airliners, with the total cost being far less that something new.

SMB Stage Lines was s shortening of ‘Sedalia-Marshall-Booneville Stage Lines’. Founded as a taxi service in 1920 and then a bus company in 1930. It was the largest air taxi mail company in 1971. it operated a scheduled air service in the midwest for a number of years flying DC-3 as well as Convair and Beech twins. Ceased operations in 1990

This particular kit was originally issued by Nitto, who did several different boxings, including miltary versions. I built the TWA boxing many years back and found it to be a nice kit. The moldings are still in very good condition and while a fairly basic kit, builds well. Detailing is via engraved panel lines and Doyusha has decided to mold it in white plastic.

The kit provides a fair cockpit section that includes the radio room. You have a pair of front seats and a radio operator's seat. There are control wheels and an instrument panel that takes a decal, not that you will see very much in there. There is no cabin and the fairly thick windows are gang joined and fit from the inside so prepainting the fuselage around the windows would be advised. Closing the fuselage halves will trap the tail gear.

Wings are a single lower section with separate upper halves. To the nacelle areas, one attaches the firewall, engine piece and the forward cowlings. The prop can be made to rotate. Landing gear is fairly well done and you are provided skis, though I doubt any of the airline versions would have used these. Tailplanes are a single piece and slot into the rear fuselage. There are a number of antennas, but I'd leave these off until the very end to prevent breaking them.

Instructions seem to be universal and provide information for bits not used on this kit, including the building of a fairly complex looking dual long wire antenna for the underside of the fuselage. Since the instructions are basically all in Japanese, one isn't really sure which of the two types of prop to use, but I'd put the paddle blade ones on this one. There are photos of SMB planes on the 'net so you may wish to use those for reference. Decals are nicely printed and the placement guide shows another airline scheme so it is obvious that Doyusha is saving a bit of money on paper. The decals are Japanese 'old school' where the whites are actually off white. Use the box top for your color information. The plane is basically white with dark blue engine nacelles to match the cheat line and a somewhat turquoise underside. You will also have to paint on the de-icer boots along with the area around the cockpit. Wings and tailplanes are unpainted metal.

So, people read these things to see if the kit is worth picking up. I have to say yes. It is available currently from a variety of sources and the price from the bayers is all over the place. The kit will take some of those modeling skills, but none of the advanced ones. My biggest complaint about the kit is that I think the cowlings are too 'open' in the front and the wheels could be better, but for a kit of its vintage it makes into a very nice model and if the scale doesn't put you off, I'd recommend it.  

May 2019

Copyright ModelingMadness.com. All rights reserved.

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.