|PRICE:||3200 yen SRP|
|REVIEWER:||Scott Van Aken|
|NOTES:||2022 Limited Edition|
The history of the A6M Zero-Sen has been well documented in other reviews. The floatplane fighter version, Allied code-named 'Rufe' was developed by Nakajima in response to a request by the Japanese Navy for a float fighter based on the A6M2. This was mainly due to the Japanese inability to quickly build runways. There was no Japanese equivalent of the Seabees to do this. Therefore the need for defending fighters that could take off from and land on the water to defend any newly acquired ocean-front property. Like their seaplane buddies, many 'Rufe' units operated from a tender.
While a new fighter specifically designed for this purpose, the Kawanishi N1K1 'Rex' was being developed, it would be years before it was operational. Undertaking the job of converting the A6M2, Nakajima had a prototype flying in less than a year from initial development, first flying on 7 December 1941. There were 327 'Rufes' built and they saw action in nearly all theaters of the war in the Pacific, being used right up until the end of the war. The first deployment of the type was to a sleepy little bug-infested island in the Southwest Pacific called Tulagi, across a strait from a larger, even more inhospitable place that no one ever heard of called Guadalcanal.
Where enemy fighter opposition was light or weak, the 'Rufe' did well. Even against more advanced types, 'Rufe' pilots were able to score well and a few 'Rufe' pilots became aces.
Sasebo is on the northwestern coast of the island of Kyusu and was then, as now, an important base for the Japanese Navy. The Sasebo Flying Group was formed in 1920 and was renamed the 951st Air Group in December 1944. The unit operated a variety of floatplanes including the N1K1 and F1M2 in addition to the A6M2-N.
This is one of Hasegawa's many Limited Edition boxings that vary from the base kit only by a box art and decal change. The development of the 'Rufe' required an additional sprue or two to deal with the floats, the major addition being a new lower wing, new fuselage halves, and a beaching dolly so it could be properly displayed.
In usual Hasegawa form, you get a very complete cockpit that uses decals over raised instrument panel detail as well as nicely done sidewalls. This is trapped between fuselage halves and the upper cowling added in place. The engine is four pieces with the gearbox piece including pushrods. Since the one-piece cowling is so tight fitting, no exhaust piping aside from the end pieces is required.
The lower wing requires holes to be opened if you wish to install the bomb racks. You also need to fill in the aileron trim tab panel lines and one other panel not found on the Rufe. The best place to put weight on this kit is in the front of the main float and 16 grams (not a small amount) is required. If using the bombs, you'll find each bomb and rack assembly is seven parts. There are braces and a ladder that fit onto the float prior to attaching it to the fuselage. The canopy is several pieces as is the prop assembly with separate blades. A nice ten piece beaching dolly is provided so you can display your completed model.
Standard fare for the instructions with Gunze paint references. There are two camouflage options. One is the earlier overall green-grey while the other has a dark green upper surface. Both have the yellow leading edge ID markings. You are provided four tail codes so you can pick whichever one you want. The decals are superbly done and will work as well as any aftermarket set. There are aftermarket decals available for this kit, but then what would be the purpose of buying a limited edition boxing?
No surprises here. Another fine boxing of what is a great kit of this type. Those wanting to save some $$ will go for the much older Tamiya version, which isn't all that bad. But those who want the best on the market in this scale will grab one of these.
Copyright ModelingMadness.com. All rights reserved. No reproduction in part or in whole without express permission from the editor.
Thanks to me for getting this one.
If you would like your product reviewed fairly and fairly
or see other details in the
Back to the Main Page
Back to the Review Index Page
Back to the Previews Index Page
If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.
Back to the Main Page Back to the Review Index Page Back to the Previews Index Page