Dead Design 1/48 B-26C Invader canopy masks
|REVIEWER:||Scott Van Aken|
|NOTES:||For the ICM kit|
This Dead Design offering is a set of masks for the ICM 1/48 B-26C Invader. This set is just for the clear bits and does not include wheel masks. As you can see, several of these masks will require masking fluid to fill in the center of some masks. These are kabuki tape type of masks for those who would rather use that material. As with all the tape masks, one has to have good eyes and lighting to locate the masks so they can be picked out with a blade tip. I've used these in the past and they work as advertised saving a bit of time and a lot of frustration. Well worth picking up.
Copyright ModelingMadness.com. All rights reserved. No reprodution in part or in whole without express permission.
Thanks to Dead Design for the review sample. You can get yours at this link.
If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.
Back to the Main Page Back to the Review Index Page Back to the Previews Index Page