Eduard 1/48 P-51C Mustang
KIT #: | 82107X |
PRICE: | $24.95 |
DECALS: | None supplied |
REVIEWER: | Tom Cleaver |
NOTES: |
Bullseye decals and Eduard aftermarket bits (see article). |
HISTORY |
After my friend
Brigadier General Clarence E. “Bud” Anderson passed away on 17 May 2024, and
having received review copies of the new Bullseye decals for 357th Fighter Group
P-51Bs, I decided to make this model of Bud’s famous “Old Crow” P-51C-10 in his
memory.
Bud Anderson was born in Oakland California on January 13, 1922, and spent his early years on a rural farm near Newcastle California, where he attended Placer Union High School, Sacramento Jr College and George Washington University. He learned to fly at 19, gaining his private pilot’s license in 1941 through the Civilian Pilot Training Program while attending college. In January 1942 he entered the US Army Aviation Cadet Program, where he received is wings and commission in September 1942.
He joined the recently-activated 357th Fighter Group at Hamilton Field, California and was assigned to the 363rd Fighter Squadron. After training was completed, the 357th was assigned to the Ninth Air Force in England, arriving in November 1943. They were the third Nith Air Force fighter group to be equipped with the new P-51B Mustang. After a high level argument betweemn Eioghth and Ninth Air Force over the use of the P-51B, General Eisenhower aughorized the 357th’s transfer to VIII Fightrer Command, with the P-47-equipped 358th Fighter Group transferred Ninth Air Force in return. The 357th became operational in February 1944 in time to participate in Big Week.
Bud flew two
combat tours with the 357th, flying 116 combat mission in 480 hours, destroying
16.25 enemy aircraft in aerial combat and one on the ground. Bud was the highest
scoring ace in the 363rd Fighter Squadron.
Bud’s airplanes were all named “Old Crow,” for the cheapest bourbon whiskey available at the time, beginning with the P-39Q he flew during training in the US. The first P-51B-1, s/n 43-6723, was lost on 21 February 1944 with 2nd Lt. Al Boyle, who became a POW. Bud’s second P-51B, 43-12315, was brought into the 357th by former RAF exchange pilot Lt Melvin Kehrer, who flew it in the 362nd FS; after Kehrer was lost on his 4th mission in P-51B 43-6625, on 25 Feb 1944, Bud was assigned the airplane, which became his second P-51B “Old Crow.” This P-51B was lost on 22 March 1944 with Lt Carter Jones, who became a POW.
Bud’s third Mustang, P-51B, 43-24823, lasted the rest of his first combat tour. This airplane arrived in the group in May 1944 unpainted, and was given an overall camouflage scheme of RAF Dark Green upper surfaces and Sea Grey Medium lower surfaces, and was fitted with a Malcolm canopy. Bud shot down 12.25 German aircraft in this airplane, which was given to 1st Lt Bill Overstreet who repainted it as “Berlin Express” after Bud went home on end-of-tour leave. It eventually was assigned as a trainer at the 357th’s Clobber College for replacement pilots and survived the war.
THE KIT |
Eduard’s “Overtrees”
kits have the plastic of the standard kit, without the photoetch detail set or
decals. I used the new Eduard “Look-plus” instrument panel and photoetch
seatbelts, and used Bullseye Decals new “Yoxford Boys #6" sheet, 48-032 for the
markings. Scott Brown’s decal series for 357th Fighter Group P-51s, was
extensively researched by Scott, who knew most of the group’s pilots over the
past 30 years. The decals are printed by Cartograf from designes by Scott and
Jennings Heilig, and are top quality.
CONSTRUCTION |
The kit was assembled following the instructions, with deviations from the instructions since I knew the areas of “fiddly” to deal with. The best way to assemble the cockpit, which is the major fiddly area, is to slice off the guides on the fuselage sides, assemble the cockpit on the floorboard, then attach the side detail panels to the cockpit assembly in order to get them properly aligned, then glue this entire assembly into the fuselage. Everything came together very easily with no misalignment on either fuselage half. All else was done followeing the instructions with no difficulty.
COLORS & MARKINGS |
I decided to do
the model with the full D-Day stripes. I first airbushed a thin coat of Tamiya
Flat White XF-2, then masked these off with Tamiya tape so they were not neat
and straight, as show in photos of the original airplane. I then airbrushed XF-1
Flat Black, and masked those off. After preshading panel lines with XF-1, I
painted the upper surfaces with XF-81 RAF Dark Green and the lower surfaces with
XF-83 RAF Sea Grey Medium.
I unmasked the stripes and brush painted the white stripes with thinned XF-2 Flat white, to deepen the color and leave it “distressed” with brush strokes, for a realistic look.
The decals went on without problem under a coat of Micro-Sol. The decals are thin, and will get wrecked if you use a stronger setting solution.
I used Eduard Brassin wheels, painted with “white sidewalls”. The Malcolm hood was attached in the open position.
CONCLUSIONS |
The Eduard P-51B kit is excellent, whether you use a Profipack kit or the cheaper Overtrees. I’ve had a model of Bud’s P-51D and long wanted to have his P-51B. Recommended for all modelers other than beginners.
Thanks to Eduard for the review kit; thanks to Scott Brown for the decals.
11 July 2024 Copyright ModelingMadness.com. All rights reserved. No
reproduction in part or in whole without express permission. If you would like your product reviewed fairly and fairly quickly, please
contact the editor or see other details in the
Note to
Contributors.