Hasegawa 1/72 F-14D Tomcat 'VF-101 Grim Reapers'

The final variant of the F-14 was the F-14D Super Tomcat. The F-14D variant was first delivered in 1991. The original TF-30 engines were replaced with GE F110-400 engines, similar to the F-14B. The F-14D also included newer digital avionics systems including a Glass cockpit and replaced the AWG-9 with the newer AN/APG-71 radar. Other systems included the Airborne Self Protection Jammer (ASPJ), Joint Tactical Information Distribution System (JTIDS), SJU-17(V) Naval Aircrew Common Ejection Seats (NACES) and Infrared Search and Track (IRST).

Although the F-14D was to be the definitive version of the Tomcat, not all fleet units received the D variant. In 1989, Secretary of Defense Dick Cheney refused to approve the purchase of any more F-14D model aircraft for $50 million each and pushed for a $25 million modernization of the F-14 fleet instead. Congress decided not to shut production down and funded 55 aircraft as part of a compromise. A total of 37 new aircraft were constructed and 18 F-14A were upgraded to D variants (these were designated as F-14D(R). The R was for rebuild). An upgrade to the F-14D's computer software to allow AIM-120 AMRAAM missile capability was planned but was later terminated.

While upgrades had kept the F-14 competitive with modern fighter aircraft technology, Cheney called the F-14 1960s technology. Despite some aggressive proposals from Grumman for a replacement, Cheney planned to replace the F-14 with a fighter that was not manufactured by Grumman. Cheney called the F-14 a "jobs program", and when the F-14 was canceled, an estimated 80,000 jobs of Grumman employees, subcontractors, or support personnel were affected.

Starting in 2005, some F-14Ds received theROVER III upgrade and were designated as F-14D(R). Of course, this designation only confused things with the rebuilt aircraft, however, since the system was only used for the F-14s final deployment, the whole thing is really moot.  

Hasegawa has reboxed the Tomcat at least three or four dozen times, judging by my slowly growing collection of F-14 kits. It was natural that they'd get the most out of what has to have been an expensive molding, judging by the plethora of small parts and inserts that come with the kits. There are so many parts that the box is actually bulging in an attempt tokeep them from escaping. You can see the number of bits and pieces from theimage above. In many ways, this is just a smaller version of the larger andequally impressive 1/48 F-14 that Hasegawa has produced. Typical of Hasegawa,the kit came with all those sprues in two bags. As a result, there were a numberof parts broken off the sprues and the bits have numerous scratches on them. In order to be sure that we have a proper F-14D, there are is a new sprue to provide the additional things that are changed, which in this case would be all the F-14B upgrades as well as a targeting pod and pylon, new lower chin seeker, seats, instrument panels, and gun gas extraction panels. I'm not 100% sure if ALL the upgrades are in this kit, but it is enough for most modelers

Asdemanded, the panel lines are engraved and the kit offers the ability to havethe flaps and slats deployed. In fact, to do it otherwise will require a bit ofsurgery to be done on the slat tracks. You can also position the glove vanesopen or closed. Again, some surgery is needed for the closed position. All F-14shad them wired in the closed position after it was realized that they didn't really do anything and were an additional maintenance hassle.  You also have the ability to have the speed brakes and entrance steps/ladderopen or closed, and two different tails, though one set is not for thisparticular boxing. So much has the F-14 been modified and updated over the yearsthat you really need to have photographs of the aircraft that you are modelingto get everything right.

As required by its price, this kit comes with a small fret ofetched metal. These bits are for the interior, canopy and exhaust. The metalworkis very well done and should really enhance your Tomcat. For this kit, they supply the standard F-14A instruction sheet and an addendum sheet that shows the D model differences The instructions arevery well done as you would expect. They offer color callouts based on Gunzepaint as is the norm with Hasegawa over the last decades. Every option anddifference between the aircraft on the decal sheet is given so that you can do aproper job of things. 

For markings, we have markings for two planes from what was eventually the only F-14 training unit after VF-124 was disestablished; VF-101 in Oceana, VA. One is the box art plane in a retro scheme of light gull grey and white. It is only a semi-retro scheme as the only white bits are the rudders and the lower side of the fuselage and flying surfaces. The lower glove box is left in grey. The other is an aircraft in the standard TPS paint scheme with black fins, ventral strakes and canopy area. The black areas will need to be painted by the builder.

You can add this one to a growing list of Hasegawa limited reissue kits. I guess it is a good way to do business as they seem to sell rather well. I'm surprised at how well these molds have held up. The final result of the build is a superb model of an important US fighter.