|REVIEWER:||Scott Van Aken|
Kit: In 1939 Germany was rapidly preparing for global hostilities. The plans of the German command supposed an instantaneous capture of quite large areas of other countries, and therefore special attention was paid to the question of the greatest possible motorization of infantry units. Besides a large number of different types of trucks which were already in the Wehrmacht's inventory, staff buses also began to be taken on charge, whose main task was the conveyance of officers during offensive actions of the army with a likely prospect of minimal resistance by an opposing party in the conflict.
The practice of building buses on a truck's chassis had existed for a long time, and therefore the most common types of buses which came into the German's inventory were based on the most widely used trucks. One of the most popular trucks at this time was the well-known Opel Blitz, and on its chassis was designed a standard army bus (at the time the more common term for it was "omnibus").
The Ludewig firm which was engaged in designing the bus, was located in Essen and had great experience in the manufacture of civilian multiseat vehicles. The standard chassis of the three ton truck was extended a little bit (up to 4450 mm), and the frame structure was reinforced. The original all-metal body of the new bus was quite elegant in outline, and only the front part where the engine was hidden, and the classic radiator with its distinctive logo, immediately reminded one of its predecessor, the famous "Blitz". Inside the cabin were several rows of seats which could be easily demounted if necessary (transportation of bulk goods, medical equipment, etc.).
Series production of the bus, officially designated the Opel 3.6-47 type W39, started in the second half of 1939, almost at the same time as the invasion of Poland by Germany and the start of WWII. At first, the number of vehicles produced per month was very small, but already in 1940 about one hundred units per month off were coming off the production line in Essen. Series production lasted until mid-1943, when the situation became worse for Germany at the Front, basic industrial materials were in short supply, and as a result, Ludewig had to seriously simplify the structure of the bus. During this period 2,880 units of the early version were produced overall, which were sent both to the Eastern Front in Russia, and to the Afrika Corps of General Rommel in North Africa.
In addition to its main purpose - the conveyance of Wehrmacht officers - buses had to perform various other functions such as those of mobile headquarters, telephone exchange and radio station, mobile bakery and laundry, etc. Special note should be made of their role in transporting
wounded from battlefield to hospital - rows of seats were removed and in their place several stretchers with wounded could be easily brought through the back door that opened into the interior, thus leaving space free for the installation of medical equipment.
Opel Blitz 3.6-47 buses were used by the army until the very end of the war, but immediately afterwards they quickly disappeared, giving way to more modern developments of the Opel concern during the early postwar years.
This particular boxing depicts one of the staff wagons that were equipped for hauling around the offices for a major unit. As such, not only does the kit come with the bits for the standard bus, but also an additional sprue that contains the shelving, seats, radios, tool boxes and even the typewriter needed. It also includes a much larger roof rack to carry gear that a normal bus would not need.
There are six nicely molded sprues of which the one for suspension bits is duplicated. There is no clear sprue, but thanks to the flat windows, a piece of properly marked acetate will work just fine. There is also a rather good sized etched fret for the larger roof rack and window shutters for the most part. I found a few depressions on some thick pieces, but nothing that can't be fixed. I have included an additional image of the new sprue. Just delete the one seat sprue from the overall image.
The body is built of mostly flat parts save the roof. I know that many would like a one-piece body, but really, it is easier to mold it in sections like this. The kit is not a curb side as it has a fully detailed engine (well, as fully detailed as you'd expect in this scale). Suspension bits are well done also and you get a nice one-piece ladder type chassis on which to fit these pieces. Under the chassis you'll fine a fuel tank, exhaust, and spare wheel. The interior contains a full set of seats for passengers and a near centrally mounted driver's seat. I should mention that several of the external bits need to have holes drilled. There are no pilot holes for these as on many kits, so you'll need to follow the kit instructions on placement.
There are two markings options. One is the cover vehicle as belonging to the Afrika Korps in 1942. The other is a standard Panzer Grey vehicle from the very popular 'unknown unit; Eastern Front' in 1942. The small decal sheet is well printed and offers little more than license plates. A nicely done paper map is also included to put on the large table.
A very neat idea for a kit and thanks to its rather unusual subject, one that should be popular. This version may well be the only other one done as the part number on the acetate windows only has this and the initial boxing on it. We shall see.
The Roden web site.
Thanks to Squadron Products for providing the preview kit. Get yours today at your local shop.
If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the
Back to the Main Page
Back to the Previews Index Page