Tamanoir Maquettes/MK72 1/72 SdKfz 10 Afrika Korps

KIT #: 07202
DECALS: Three options
REVIEWER: Scott Van Aken
NOTES: New tool kit . 81 parts


Germany fielded a whole range of halftracks during WWII, with different sizes for different purposes. The Sd.Kfz.10, one of the lighter halftrack types, was conceived as a prime mover for small towed guns such as the 3.7cm PaK36 and 2cm FlaK30. Measuring 4.5m long and weighing 4.9 tonnes, this Demag-designed vehicle could carry up to eight passengers. Its top speed was 75km/h. Around 14,000 Sd.Kfz.10 halftracks were built from 1938-45, and the chassis was also used for the Sd.Kfz.250 armored halftrack.


This is the second offering from Tamanoir Maquettes and not unusually, the plastic is identical from the initial offering other than the color. As before,  all of the parts are on a single sprue and there is no photo etch or resin to fill in missing injected details. It is all right here. I should point out that this kit does not have a top up option.

The kit comes in a resealable polybag with a nicely done decal sheet, a sheet of acetate for the windscreen, and a folded sheet for instructions. The molding on the parts is very good. There are a few sink areas on thick parts and some shallow ejector pin marks, but really, nothing of any real consequence. One can easily remove the ejector pin marks and the sink areas should be hidden with the completion of the model. The mold seams are generally quite small and though there is a teensy bit of flash, it is no worse that what one finds on many other kits.

With 81 parts, this is a pretty detailed kit. The tracks are standard styrene that one bends into shape. This will make it quite easy to paint and weather. The tracks are apparently a tad long as the instructions will have you remove two links. It is a curbside as the car guys say but with a complete suspension. The only real options are to install black out headlight covers or not. The kit comes equipped with the usual picks, shovels and jacks as well as a nice selection of Jerry cans. I found it quite impressive that the transmission was molded into the main hull section. You can see it in the parts image. There is a decal to be used for the instrument panel, which is a nice touch. In this scale I generally prefer decals as I can't paint that well. This one is a top down kit and the folded top is well molded.

Instructions are very well done with superbly drawn construction steps. There are small detail drawings to help with the fit of some parts and there are two quarter views of the completed vehicle to help you ensure that you have everything in the right place. A template for the windscreen is printed onto the instructions.

Markings are provided for three desert tan vehicles. The back of the box is a four view for painting and markings placement. This includes a color guide in Model Air and Model Color as well as RAL shades. No color information is provided in the construction guide. The versions are all from 1941/42. They are from 21 Panzerdivision, 15 Panzerdivision and 90 Leichte Afrika Division. The back of the box indicates which decals from the sheet are used in which location, depending on the choice of unit.  The small sheet, here shown more than full size, is well printed and appears to be in register.

This is a great start for a new company and they will be doing other vehicles in this scale. I'm looking forward to giving this one a go, even though I recently finished a half track kit. Look for it in your local shop or ask for it.



May 2011 

Thanks to www.tamanoir.ch for the preview kit. The kit is being distributed world wide so check the link for more info. 

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note toContributors.

Back to the Main Page

Back to the Previews Index Page