Bronco 1/35 'Buffalo' 6x6 MPCV w/ Slat Armor and Spaced Armor
KIT #: CB35145
PRICE: $112.00 SRP
DECALS: One option
REVIEWER: Scott Van Aken


The Buffalo vehicle was designed based on the successful South African Casspir mine-protected vehicle. While the Casspir is a four wheeled vehicle, the Buffalo has six wheels. Buffalo is also fitted with a large articulated arm, used for ordnance disposal. Both vehicles incorporate a "V" shaped monohull chassis that directs the force of the blast away from the occupants.

Buffalo is also now equipped with BAE Systems' LROD cage armor for additional protection against RPG-7 anti-tank rounds. Glass armor is sufficient at 6 inches thickness. Run-flat tires are present in all tires. The Buffalo combines ballistic and blast protection with infrared technology to detect the presence of dangerous ordnance and a robotic arm to disable the explosive ordnance. Personnel operate the Buffalo’s 30-foot robotic arm and claw from within the armoured hull via a mounted camera and sensory equipment, to safely dispose of mines and IEDs.

In 2004, the United States had a limited number of Buffaloes in service, with an order for 15 more, at a cost of $10 million. On June 6, 2008 Force Protection, Inc delivered its 200th Buffalo to the U.S. Military. Interestingly, since these vehicles are so specialized, like other Mine Protected Vehicles, those vehicles not left in country, are either put in storage or farmed out other organizations and will not be replaced in the inventory when they reach the end of their operational life or upgraded. At a mere $670,000 each, they are, of course, throw away assets.


This is the third  release of this kit by Bronco, each one getting more and more bits added to it. I'm not sure how many parts it has, but it seems it would put a Dragon panzer kit a run for its money. The purpose of this vehicle is to dig up and deactivate roadside bombs and mines. It is not a small vehicle and is larger in length than may tank kits (minus the barrel, of course). The main difference between this kit and the previous one is that it has the slat and spaced armor. The slat armor is molded in injected plastic. This is, of course, not really armor in the main sense of things, but works in much the same was as 'Schurzen' on German tanks and is designed to allow RPGs to detonate against the screen and therefore use up its force relatively harmlessly. This boxing also includes spaced armor plates along the side of the vehicle as apparently the slats were insufficient to stop incoming rounds. In all other respects the kit is the same as the previous two releases.

Molded in the usual tan plastic that Bronco likes to use, the kit is up to their renown standards when it comes to detail.  The options are the ability to model the scoop extended or retracted against the side of the vehicle, and to install the remotely operated machine gun and sensors, which would fit on the pedestal on the forward upper hull. 

There is a nicely done photo etch fret for screens, a few equipment boxes and a myriad of smaller bits and pieces that are the norm with modern armor kits. This includes hinges so if one wants to represent the slatted sections 'open' one can do so. Also included are two sizes of plastic tubing in .4 and  .6 mm sizes. These are used to represent what I guess are hydraulic lines.

The kit provides a very detailed suspension and drive line as much of this is exposed. I found it interesting that each wheel/tire is built up of separate bits with the tread being a separate item as well. The kit has a full interior with driver's position and various crew seats. No engine is provided, so this is technically a curbside. The upper bodywork is well done with properly thick 'glass' windows that should allow you to see your interior work unless you tint them.

With a vehicle like this, there is a ton of external detail as most equipment is kept outside. The inside, due to the vee shape, is rather limited as to what can be carried, though a full radio suite is provided. One of the highlights of the kit is the large crane scoop that is used to dig under mines at a distance that does not put the crew in danger. As mentioned, this can be built extended or retracted against the side.

Bronco's instructions are contained in a 39 page color book. Each of the construction steps is well drawn and has detail drawings to help out. In some areas the builder will need to stretch some sprue andperhaps drill a hole or two.

The decal sheet is very nicely done and provides markings for a single vehicle of an unknown unit. The vehicle is in a desert tan and one is supposed to paint the clear bits with a clear blue to duplicate the very thick armor plated glass that is used on these huge vehicles. The sheet includes all the instrument panel dials as part of the suite. 


This is very much a cool kit for those who like to build modern military vehicles. It will not be a quick build, thanks to all the parts that are included, but I can guarantee that it will stand out in any collection.


December 2014

Thanks to for the preview kit. This one should be at your local shop or have them order it for you.

If you would like your product reviewed fairly and fairly quickly, please contactthe editor or see other details in the Note toContributors.

Back to the Main Page

Back to the Previews Index Page