Ultracast 48252: FW-190A-F Prop and Spinner - VDM 9-12067A Metal Blades


$12.95 CDN


Scott Van Aken


resin. S&h is $9.95 CDN  worldwide

This is the first of three sets of prop blades and spinners for the FW-190 from Ultracast. This set consists of the standard metal blades and comes with both 12 and 14 blade cooling fans. Designed for the Hasegawa kit, I would be willing to bet that it might also fit the older Dragon kit and perhaps some others. Each of the blades is separate and simply slots into the spinner (after removing the resin stub, but perhaps even without doing so). There is no keyway so you'll need to check pitch when doing this. The cooling fans have some very thin flash on them that will be a snap to clean up.

A very worthwhile investment and one that will be a big plus to your next 190 effort.

December 2013

Review copy courtesy of the fine folks at Ultracast. Visit them at their website.

If you would like your productreviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.