This is the second of two prop sets from Ultracast. This set has two complete props. These have the 23-E-50 hub with the 6477A-0 blades. These props were used onB-17F/G, B-24s, C-47s, and DC-3s. The sets are superbly molded and one only has to remove the hubs from the mold blocks (a sharp knife will do it), and sand down the roots of the prop blades. Then simply slide them into the holes in the hubs. These are the paddle blades blades so one really needs a photo reference if the aircraft type being modeled used both types. For the B-17 and B-24, a second set will need to be purchased to do all four engines.
March 2013
Review copy courtesy of the fine folks at