SET: Voyager Model 1/35 88mm Flak 36/37 detail set
KIT #: PE 35115
REVIEWER: Scott Van Aken
NOTES: Brass for Tamiya 35017/35283

This superb set is for the venerable Tamiya 1/35 88mm FLAK 36/37 kit with the Zundapp motorcycle.

You get no fewer than four large, three medium and several smaller frets of brass along with a section of wire for moveable bits, some line, small resin bits and some plastic rod.

The extent of this set is quite considerable and it touches every part of the kit from the transportation rig to the replacement gun shield and even to parts for the Zundapp motorcycle.

The comprehensive instruction sheets, covering five pages, show exactly what has to be done and where all the various bits. There are even elevation and azimuth dials in acetate to put in place. This is not a set for the week-end special, but is about as in-depth a one I have ever seen. If you are serious about your hobby and want the greatest level of accuracy you can get, then this is a set you should consider.

 February 2007

My thanks to Voyager Model for the review set. Please visit them at for this and other fine sets. Ask your favorite hobby shop to get these for you if they don't carry them.

If you would like your product reviewed fairly and quickly by a site that has nearly 350,000 visitors a month, please contact me or see other details in the Note to Contributors.

Back to the Main Page

Back to the Detail Sets Page